N10-008 Exam Dumps [Updated] Reliable CompTIA Network+ Preparation Materials

Looking for effective CompTIA Network+ preparation materials to better prepare for the CompTIA N10-008 exam? Our updated N10-008 exam dumps meet the requirements.

From this page: https://www.pass4itsure.com/n10-008.html Get the latest N10-008 exam dumps questions and answers (384+) preparation materials and make sure to practice them thoroughly, it’s easy to pass the CompTIA Network+ exam.

Did you know everything about the CompTIA Network+ exam?

CompTIA Network+ verifies the technical skills required to securely build, maintain and troubleshoot the fundamental networks that businesses rely on.

You need to know:

Exam Name: CompTIA Network+
Code: N10-007 & N10-008
Note: CompTIA Network+ N10-007 (English) will be retired on June 30, 2022.
Skills: Network Fundamentals, Network Implementation, Network Operations, Network Security, Network Troubleshooting
Number of Questions: N10-008 Up to 90 questions
Question Types: N10-008 – Multiple Choice and Performance-Based N10-007 – Multiple Choice Questions (single and multiple answers), drag and drop and performance-based
Exam time: 90 minutes
Requirements: CompTIA A+ certification and at least 9 to 12 months of networking experience
Passing score: 720(100-900)
Language: N10-008 – English, Japanese for reservations, other TBD
N10-007 – English, German, Japanese, Spanish, Portuguese
Cost: $348

From the above summary information, it can be seen that CompTIA Network+ refers to two exams (N10-007 & N10-008) but N10-007 is about to retire and N10-008 is the main exam.

Also with regard to networking, how is the comparison between CompTIA Network+ and Cisco CCNA different?

CompTIA Network+ Cisco CCNA

On the chart above, I believe you have already made it clear.

Free N10-008 Exam Questions & Answers

QUESTION # 1

Which of the following can be used to decrease latency during periods of high utilization of a firewall?

A. Hot site
B. NIC teaming
C. HA pair
D. VRRP

Correct Answer: B

QUESTION # 2

A technician is setting up a new router, configuring ports, and allowing access to the Internet. However, none of the users connected to this new router are able to connect to the Internet. Which of the following does the technician need to configure?

A. Tunneling
B. Multicast routing
C. Network address translation
D. Router advertisement

Correct Answer: C

QUESTION # 3

Branch users are experiencing issues with videoconferencing. Which of the following will the company MOST likely configure to improve performance for these applications?

A. Link Aggregation Control Protocol
B. Dynamic routing
C. Quality of service
D. Network load balancer
E. Static IP addresses

Correct Answer: C

QUESTION # 4

A network administrator is implementing OSPF on all of a company\\’s network devices. Which of the following will MOST likely replace all the company\\’s hubs?

A. A Layer 3 switch
B. A proxy server
C. A NGFW
D. A WLAN controller

Correct Answer: A

QUESTION # 5

The management team has instituted a 48-hour RTO as part of the disaster recovery plan. Which of the following procedures would meet the policy\\’s requirements?

A. Recover all systems to a loss of 48 hours of data.
B. Limit the network downtime to a maximum of 48 hours per year.
C. Recover all systems within 48 hours.
D. Require 48 hours of system backup maintenance.

Correct Answer: C

QUESTION # 6

A technician wants to install a WAP in the center of a room that provides service in a radius surrounding a radio. Which of the following antenna types should the AP utilize?

A. Omni
B. Directional
C. Yagi
D. Parabolic

Correct Answer: A

QUESTION # 7

A technician has completed the configuration on a new satellite location. The location has a new firewall and a small internal network. The technician has been asked to perform basic vulnerability testing. Which of the following tools would BEST assist the technician in verifying the security of the site?

A. Packet sniffer
B. Bandwidth tester
C. Port scanner
D. Protocol analyzer

Correct Answer: D

QUESTION # 8

Which of the following technologies provides a failover mechanism for the default gateway?

A. FHRP
B. LACP
C. OSPF
D. STP

Correct Answer: A

QUESTION # 9

Which of the following would be used to enforce and schedule critical updates with supervisory approval and include backup plans in case of failure?

A. Business continuity plan
B. Onboarding and offboarding policies
C. Acceptable use policy
D. System life cycle
E. Change management

Correct Answer: E

QUESTION # 10

A network technician installs a new Layer 3 switch in the accounting office. Which of the following should the technician configure on the switch to enhance network security?

A. Spanning tree
B. Access control list
C. QoS settings
D. Duplex settings

Correct Answer: B

QUESTION # 11

A rural municipality has built an external public WiFi meshed network using omnidirectional antennas. After the initial build, the performance meets expectations, and the municipality enters a six-month pilot program in the fall. By the end of the pilot program in the spring, the performance has fallen dramatically.

The pilot has a static number of users with no increases in usage from beginning to end. Which of the following would be the MOST likely reason for the performance issues?

A. Too many users in the pilot creating overcapacity issues
B. Buildings creating reflection issues
C. Omnidirectional antennas being insufficient for outdoor use
D. Foliage creating absorption issues

Correct Answer: D

QUESTION # 12

A customer has asked a technician to upgrade the wireless router to the fastest speed possible. The technician performs a site survey and notices several older devices will not be able to connect to a router that operates In the 5GHz range. Which of the following options should the technician suggest to the customer?

A. 802. 11a
B. 802. 11ac
C. 802. 11b
D. 802. 11n

Correct Answer: B

QUESTION # 13

A network technician has been asked to provide daily reports on network saturation. Which of the following would BEST reflect these statistics?

A. Average bandwidth usage
B. Error rate on trunk ports
C. Packet drops to the ISP
D. Processor utilization for the Internet router

Correct Answer: A

Download a free N10-008 exam question >> https://drive.google.com/file/d/1yKaYFrPtiEYfoMrXkYiODlcT6lky5-rr/view?usp=sharing

Continue to view 384+ CompTIA Network+ N10-008 exam questions, here.